pass window mech

as above my window mech packed up when i finished work today!!!!!!!!! gutted so ive currently got a screw driver holdin my window up! FOR F*$£+ck sake

if anyone knows the best place to get one whould be................... much appreciated

i just had a look on ebay could only see 4 on ther but not a passenger side or what other mechs would fit????

Cheers people

I think the motors are the same, if you stripped the motor from the Mechanism, replaced it with another, it should work... It worked for my missus old Focus...

GTijon wrote:

I think the motors are the same, if you stripped the motor from the Mechanism, replaced it with another, it should work... It worked for my missus old Focus...

what so i can use any motor as long as it connects with my mechinism?????

blackcherrydubspares dude.get the whole mech and motor. his number is

dave89 wrote:

GTijon wrote:

I think the motors are the same, if you stripped the motor from the Mechanism, replaced it with another, it should work... It worked for my missus old Focus...

what so i can use any motor as long as it connects with my mechinism?????

It's gotta be one of the same motors from the same type of car, so that all the mounting bolts and all the electrical connections match up. but they should be all interchangable...

give gsf a call dave.

all the motors should be interchangebale throught the mk4's possibly older ones too howver the mechs will bedifferent especially 2 door to 4 door.

also some, if not all can be side dependant too

There are loads of Mk IV's over at Hainford Hall Salvage yard near Norwich.....

Sat-nav postcode: NR10 3LX Parts Tel: 01603 898197

Their website is okay, but not updated very often: www.hainfordhall.co.uk

GTijon wrote:

There are loads of Mk IV's over at Hainford Hall Salvage yard near Norwich.....

Sat-nav postcode: NR10 3LX Parts Tel: 01603 898197

Their website is okay, but not updated very often: [url=http://www.hainfordhall.co.uk

www.hainfordhall.co.uk[/quote[/url]]

thanks mate will give them a call i only need the mech as my motor is still spinnin nicely but the wire for the mech is chewed

bridgedubber wrote:

give gsf a call dave.

all the motors should be interchangebale throught the mk4's possibly older ones too howver the mechs will bedifferent especially 2 door to 4 door.

also some, if not all can be side dependant too

umm im gona go to a brekers cuz im sooooooooooo skint at the moment

No worries Dave, last time I was there, there were a shed-load of Mk IV's outside the main office. And a lot of GTi's too.

i will check it out monday i might have 1 £25 just for the mech

chrisbvr6 wrote:

i will check it out monday i might have 1 £25 just for the mech

ok mate nice 1 yea the motor is fine just the wire has all snapped up.

only thing is tho when i took the door card off there's a metal plate which is pop riveted so im unsure how im gona do it as i dont have a rivet gun

is the window mech connected to that metal plate???

u cud drill the rivets off then re-fit the panel wiv panel bolts, thats how mine was put on by a previous owner

dave89 wrote:

chrisbvr6 wrote:

i will check it out monday i might have 1 £25 just for the mech

ok mate nice 1 yea the motor is fine just the wire has all snapped up.

only thing is tho when i took the door card off there's a metal plate which is pop riveted so im unsure how im gona do it as i dont have a rivet gun

is the window mech connected to that metal plate???

Yes that is a unit all in one and i've done a few already so come and see me or call me and we will sort it out

yeah it will be one complete unit to un bolt it out there are to black rubber bungs on the metal part take them out and let the window down till you see a 10mm bolt through the holes undo them and this will let you take the glass out.then undo all the 10mm bolts all round the edge and remove anthing else conected to the metal part ie wires etc and the metal part will come away from the car with the regulator attached to it.

just bin on the mk4 forum and they got step by step pics well helpfull

so when ever your 3 chris ill have that mech mate

and wiggy if you dont mind ill give you a call for helping hand

have you got the window mech mate????

will a mk3 one fit a mk4

lol na the screwdriver was gone the next day!!!!!!, for the moment ive just taken the door card off and put a piece of wood inside the door to keep the window up and it dont look dodgy like the screwdriver did.

im in no major rush as my driver one is workin and im rather skint atm....it'll get there

wrote this while you posted ben so modifying lol umm im not sure?

k ill let you know what im doing with the golf

youll be surprised what you can change between golf of all marks

benjaminheavey wrote:

youll be surprised what you can change between golf of all marks

I suppose it could be tastfully bastardized, but having the original part surely makes the job so much easier...?

Sorry for being so blunt...

have you got that mech then chris im now gettin a few lil jobs sorted on the golf ,if not ill nip to that breakers in norwich and get 1